Buy AS54-CT3-648-AC

General
Device Type	Gateway
Enclosure Type	Rack-mountable
Installed Modules Qty (Max)	7 ( 7 )
Width	44.5 cm
Depth	46.4 cm
Height	8.9 cm
Weight	15.8 kg
Processor / Memory / Storage
Processors Installed	1 x QED RM7000 250 MHz RISC
Max Supported Qty	1
RAM Installed ( Max )	256 MB ( 512 MB ) - SDRAM
Flash Memory Installed (Max)	32 MB ( 64 MB ) - Flash
Hard Drive	None.
Networking
Form Factor	Rack-mountable
Connectivity Technology	Wired
Line Rate	T-3
Data Transfer Rate	100 Mbps
Line Coding Format	B3ZS
Framing Format	C-bit parity
Data Link Protocol	Ethernet Fast Ethernet PPP
Switching Protocol	X.25
Network / Transport Protocol	TCP/IP IPX/SPX AppleTalk DECnet NetBEUI/NetBIOS
Routing Protocol	OSPF IGRP BGP-4 IS-IS RIP-1 RIP-2
Remote Management Protocol	SNMP
Features	Modular design firewall protection NAT support CHAP authentication PAP authentication manageable
Authentication Method	RADIUS PAP CHAP
Compliant Standards	IEEE 802.3 IEEE 802.3u
IP Telephony
VoIP Protocols	MGCP SIP H.323 v3 H.323 v4 H.323 v2 TGCP
Voice Codecs	G.711 G.723.1 G.729ab G.726 T.38
IP Telephony Features	Comfort noise generation (CNG) voice activity detection (VAD) echo cancellation (G.168) adaptative jitter buffer automatic fax/modem detection and pass-through silence suppression DTMF generation/detection
Communications
Type	6 x fax / modem - plug-in module
Max Transfer Rate	56 Kbps
Max Fax Transfer Rate	14.4 Kbps
Digital Signaling Protocol	ISDN PRI
Cellular Protocol	MNP-10
Protocols & Specifications	ITU V.21 ITU V.22bis ITU V.29 ITU V.32bis ITU V.34 ITU V.90 ITU V.17 ITU V.23 ITU V.27ter k56Flex ITU V.33 ITU V.92 V.110 (I.470) HDLC
Data Compression Protocol	ITU V.42bis ITU V.44
Error Correction Protocol	MNP-4 ITU V.42 MNP-2 MNP-3
Analogue Ports Qty	648
Expansion / Connectivity
Expansion Slot(s)	7 (total) / 0 (free) x Expansion Slot
Interfaces	1 x management - console - RJ-45 - 1 2 x network - Ethernet 10Base-T/100Base-TX - RJ-45 - 2 2 x serial - 2 2 x network - T3 - BNC - 2 1 x network - auxiliary - RJ-45 - 1
Miscellaneous
MTBF	500000 hour(s)
Power
Power Device	Power supply - redundant - plug-in module
Installed Qty	2
Max Supported Qty	2
Voltage Required	AC 110/220 V ± 10% ( 50/60 Hz )
Power Consumption Operational	200 Watt
Compliant Standards	UL CSA
Software / System Requirements
OS Provided	Cisco IOS
Software Included	Drivers & Utilities
Environmental Parameters
Min Operating Temperature	0 °C
Max Operating Temperature	40 °C
Humidity Range Operating	5 - 95%
Max Altitude Operating	3.1 km
Sound Emission	59 dBA

The Cisco AS5400 Universal Gateway is the highest-density, carrier-class access server on the market, offering unparalleled capacity in only two rack units (2 RUs) with universal port data, voice, wireless, and fax services on any port at any time. Its high density (up to 1 CT3), low power consumption (7.2A at 48VDC per CT3), and Universal Port digital signal processors (DSPs) make it ideal for many network deployment architectures, especially co-location environments and mega points of presence (POPs). Universal port functionality enables the Cisco AS5400 to operate simultaneously as a network access server (NAS) and a voice gateway delivering universal services on any port at any time. The Cisco AS5400 universal services include dial access, real time voice and fax, and wireless data access. The Cisco AS5400 Universal Gateway achieves cost savings through optimized utilization of the universal port access infrastructure. Service providers can now quickly capitalize on new opportunities and realize multiple revenue streams from a single access infrastructure. As a carrier-class universal gateway, the Cisco AS5400 has hot-swappable cards, an internal redundant power supply and environmental monitoring. Its rich set of IOS features enables ISPs and enterprise network managers to m(more...)