Juniper MPC4E with 2x100GE and 8x10GE ports full scale L2/L2.5 and reduced scale L3 features CFP Mobile Port Concentrator network card. Description: Fixed configuration MPC with two 100-Gigabit Ethernet ports and eight 10-Gigabit Ethernet portsPower requirement: 12.7 A @ 48 V (610 W)Weight: 19.4 lb (8.8 kg)Model number: MPC4E-3D-2CGE-8XGE Main Features:Expansion module10 Gigabit SFP+ x 8 + 100 Gigabit CFP x 2for MX-series MX2020 Modular Port Concentrators (MPCs) are a set of next-generation advanced line modules for Juniper Networks MX Series 3D Universal Edge Routers that deliver the performance, services, and scalability that are critical to today's advanced Ethernet services edge and broadband edge networks. Designed for flexibility, MPCs introduce both the industry's highest capacity and modular 1GbE and 10GbE hardware to the MX Series portfolio, allowing customers to flexibly mix and match interfaces to create service-specific and "pay as you grow" configurations. The MPC houses the packet forwarding engines that deliver up to 120 Gbps of comprehensive Layer 3 routing (IPv4 and IPv6), Layer 2 switching, inline services, and advanced hierarchical quality of service (H-QoS) per MX Series slot. Hardware features:Line-rate throughput of up to 260 GbpsWAN-PHY mode at 10 Gbps on a per-port basisSupported only on the MX960, MX480, and MX240 routers with high-capacity power supplies and high-capacity fan trays.Supports maximum transmission unit (MTU) size of 9,192 bytes for host bound packets. For Junos OS 16.1R1 and later releases, the MTU size supported is 9,500 bytes.The ports are labeled as:10-Gigabit Ethernet ports: 0/0 through 0/3100-Gigabit Ethernet ports: PORT 1/010-Gigabit Ethernet ports: 2/0 through 2/3100-Gigabit Ethernet ports: PORT 3/0 Software features:Optical diagnostics and related alarmsConfigurable LAN-PHY and WAN-PHY mode options per 10-Gigabit Ethernet portUp to 260 Gbps of full-duplex trafficIntelligent oversubscription servicesLocal loopbackConfigurable to interoperate with routers that use the 100-Gigabit Ethernet PIC (Type 4 PIC on Type 4 FPC) LEDs:OK/FAIL LED, one bicolor:Steady green—MPC is functioning normally.Blinking green—MPC is transitioning online or offline.Red—MPC has failed.LINK LED, one tricolor per port:Green—Port is enabled.Red—Port has failed.Yellow—Port is disabled by configuration.Off—Port is disabled.
