Buy CISCO805

General
Device Type	Router
Enclosure Type	Desktop - modular
Connectivity Technology	Wired
Data Link Protocol	Ethernet USB HDLC
Data Transfer Rate	10 Mbps
Network / Transport Protocol	TCP/IP PPTP X.25 NetBEUI/NetBIOS
Remote Management Protocol	SNMP
Compliant Standards	IEEE 802.3
Processor	1 x 33 MHz
RAM	8 MB (installed) / 16 MB (max) - integrated
Flash Memory	4 MB (installed) / 12 MB (max)
Status Indicators	Port status link activity power link OK
Expansion / Connectivity
Interfaces	Serial : 1 x - 1 Management : 1 x RS-232 - RJ-45 - 1 1 x 10Base-T - RJ-45 - 1
Power
Power Device	Power adapter - external
Voltage Required	AC 120/230 V ( 50/60 Hz )
Power Consumption Operational	20 Watt
Miscellaneous
Width	24.6 cm
Depth	21.1 cm
Height	5.1 cm
Weight	0.7 kg
Cables Included	1 x network cable
Software / System Requirements
OS Provided	Cisco IOS
Software Included	Drivers & Utilities
Environmental Parameters
Min Operating Temperature	0 °C
Max Operating Temperature	40 °C
Humidity Range Operating	10 - 85%

The Cisco 805 router can connect a remote office to a corporate office or a small professional office to an Internet service provider (ISP). The Cisco 805 supports both synchronous serial connections and asynchronous dial connections, synchronous connections include Frame Relay, leased line, X.25 up to speeds of up to 512 kbps. When using asynchronous dialup with an external modem, the Cisco 805 only connects to the Internet when required, and then immediately disconnects when the line is no longer being used, minimizing per-minute usage charges. Access control lists make sure that only important traffic initiates the Internet connection, further increasing the cost savings. The advanced routing protocols of the Cisco 805, including Snapshot and triggered RIP, ensure routing table information is exchanged efficiently; and STAC compression increases total throughput. Asynchronous serial speeds up to 115.2 kbps.