Buy SPA-4XCT3-DS0

General
Device Type	Expansion module - 4 ports
Form Factor	Plug-in module
Width	17.2 cm
Depth	18.5 cm
Height	2 cm
Weight	0.3 kg
Networking
Connectivity Technology	Wired
Data Link Protocol	HDLC Frame Relay PPP
Data Transfer Rate	44.736 Mbps
Remote Management Protocol	SNMP
Line Rate	T-3
Line Coding Format	B3ZS
Status Indicators	Active carrier detect status alarm
Features	Full duplex capability
Compliant Standards	ANSI T1.403 ANSI T1.404 ANSI T1.107
Expansion / Connectivity
Interfaces	4 x network - T3
Compatible Slots	1 x Expansion Slot
Miscellaneous
Compliant Standards	VCCI EN 60950 EN55022 ICES-003 IEC 60950 EN55024 UL 60950 CISPR 22 EN50082-1 CSA 22.2 No. 60950 EN 61000-6-1 AS/NZS 3260
Environmental Parameters
Min Operating Temperature	5 °C
Max Operating Temperature	40 °C
Humidity Range Operating	5 - 85%
Compatibility Information
Designed For	P/N: 12006-AC 12006-DC 12010-AC 12010-DC 12416/320= 12810/800-AC 12810/800-DC 12816/1280-3AC 12816/1280-4AC 12816/1280-4DC CHAS-GSR8= CISCO7603 CISCO7603= CISCO7604 CISCO7606 CISCO7606= CISCO7609 CISCO7609= CISCO7613= GSR04-CHASSIS= GSR06/120= GSR10/200-AC GSR10/200-DC GSR12/60 GSR16/320-AC GSR16/320-AC4 GSR16/320-DC GSR16/80-AC GSR16/80-AC4-8R GSR16/80-AC-8R GSR16/80-DC GSR16/80-DC-8R GSR16-CHASSIS= GSR4/80-AC GSR4/80-DC GSR6/120-AC GSR6/120-AC= GSR6/120-DC GSR8/10 GSR8/40

The combination of channelized and clear channel T3 functions makes the Cisco Channelized T3 SPAs ideal for today's rapidly changing WAN environment. As an integral part of a service node where customer bandwidth needs are uncertain, the Cisco Channelized T3 SPA allows service providers to avoid determining beforehand how ports will be allocated between DS0, DS1, and DS3 connections. For enterprise remote-site connection, the flexibility to support DS0, DS1, and DS3 connections means this SPA reduces equipment expenditures by integrating the capabilities and services of numerous port adapters onto a single SPA. It also provides investment protection by growing with the enterprise to meet the needs for both today's DS0 and DS1 aggregation networks and tomorrow's T3 aggregation networks. With integrated data-service-unit (DSU) functions on a per-port basis, the Cisco Channelized T3 SPA is compatible with the large number of standards-compliant DSUs on the market. Multilink Point-to-Point Protocol (MLPPP) is supported (in hardware) to enable link aggregation >T1. Up to 12 individual T1s can be combined within a multilink bundle that appears to be a single IP link. This enables service providers to provision bandwidth >T1 incrementally, without requiring migration of the circuit and (more...)